Back to Cine
Tiffen Black Pro-Mist Filter 5.65 1/4″
Tiffen Black Pro-Mist Filter 5.65 1/4″
Related products
Wooden Camera Bridgeplate (19mm)
Unified Bridgeplate (19mm) is an ARRI standard bridge plate with 19mm studio rods (rods spaced 104mm center to center). New design allows the Bridgeplate to be converted from RED standard height to ARRI standard height making it compatible with any type of camera rig. Rubberized top coating prevents twisting and slotted design accommodates non-standard screw spacings.
Combine with Unified Baseplates for correct rod height on cameras like Sony FS7, FS5, F55/F5, Canon C100mkII/C300mkII, C100C300/C500, Blackmagic URSA Mini, Panasonic VariCam 35, VariCam LT, and risers for RED Weapon/Scarlet-W/Raven, and Epic/Scarlet.
Sony AXS-A1TS66 1TB Memory Card
AXS Memory A Series card, with 6.6 Gbps guaranteed write speed and 1 TB capacity
Ideal for VENICE 2 with high-speed 8K and 6K X-OCN recording. Compatible with the AXS-R7 Memory recorder, such as the VENICE, PMW-F55, and PMW-F5. Record 8K X-OCN and 6K X-OCN with VENICE 2. Works with AXS-R7, AXS-R5, AXS-AR3, AXS-CR1 and AXS-AR1. 4K HFR recordings
Chroziel CDM-LP-I Iris Motor
Adjust the aperture of your cine zoom or prime lens using this Lensport Iris Motor from Chrosziel and its universal connectivity. The motor features an integrated 12-pin Hirose connector cable which inserts into your compatible camera's Hirose output port. Both control and power are delivered via this connection and camera-specific broadcast protocol with a torque of 0.5 N-m. Mount the motor on your camera configuration via a 15mm rod clamp and slide it along the rod to accommodate the length of your lens. Two 0.8 MOD gears in different diameters can be switched out to properly attach to your mounted lens.
Once the motor's cable is connected to the corresponding port of your camera, it will automatically calibrate itself and find the end-stops of your lens. If you'd like to use metadata calibration, put the motor into passive mode and turn your lens' aperture ring to confirm the position of T-stop 4 and T-stop 16. The motor can be used in remote control operation via the RCP or WebGUI of your connected camera. It can also be used with auto-iris functionality.
Angénieux EZ-2 15-40mm T2.0 Lens
The EZ-2 15-40mm Cinema Lens Pack from Angenieux includes the PL mount version of the 15 to 40mm EZ-2 zoom lens with both the Super35 and FF/VistaVision rear lens-groups. The lens is fast, T2.0 in Super35 and T3.0 in full-frame/VistaVision. Swapping between the rear lens groups doesn't affect the physical length of the lens, minimum focus distance, or 2.7x zoom ratio. However, the full-frame rear lens group does change the lens from a 15 to 40mm zoom that covers Super35 to a 22 to 60mm zoom that covers the full-frame/VistaVision aperture.
The lens itself has 3 manual lens control rings: focus, iris, and zoom. Each ring features cine-style 0.8 MOD gear teeth, for compatibility with follow focus units and lens control motors. The 114mm front diameter allows you to work with a wide variety of rod supported matte boxes.
