Back to Cine

Chrosziel CDM-SFR Zoom Drive

The FR7 zoom motor unit CDM-SFR fits seamlessly into the operating functions of the Sony PTZ ILME-FR7 camera. The FR7 Zoom Servo Drive is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on the 15mm rods of the Sony PTZ head. The servo drive is controlled via the Option port of the Sony ILME-FR7. The motor control can be addressed via Sony’s camera-specific protocol and therefore can be used seamlessly with the whole ecosystem of the Sony FR7.

Due to the included Chrosziel Flexi toothed ring (#206-30), the CDM-SFR can be used with almost any zoom lens even without standard cine gearing. This opens up a complete new range of lenses to cover the creatives needs from wide angle lenses to long-zoom operation.

The FR7 Zoom servo drive unit is slid onto the 15mm rod and swiveled onto the zoom lens. The curly cables ensure safe operation within the full tilt and pan range of the Sony ILME-FR7. The tiny distribution box is mounted to the side of the FR7 base and has a built-in power input. Simply unplug the power supply of the FR7 and plug it into the distribution box. Then plug the power plug of the distribution box into the power input of the Sony FR7. Connect the RJ45 connector of the distribution box into the OPTION port of the cameras base unit (do not connect to the Ethernet port since you need this for the ILME-FR7 communication). Done

Categories: ,

Related products

Bright Tangerine Misfit Matte Box
Capture your perfect shot with the Misfit Kick 360 Mk II matte box. This versatile kit allows for 360-degree rotation and is compatible with a variety of filters and lenses. Whether you need to reduce glare, add a polariser, or control flares, the Misfit Kick 360 Mk II has you covered. The matte box offers maximum coverage for cine-servo lenses and can support trays and filters up to 5.65x5.65″. With the added Torsion Plate, vibrations are effectively absorbed, providing enhanced handling and performance. Plus, with the Frame Safe clamp adapters, the Misfit Kick 360 Mk II can adapt to any lens, making it a must-have for any filmmaker.
Read more
Canon CN10 x 25 PL Lens
Capture stunning 4K quality footage thanks to outstanding optical performance, operability and reliability. This versatile and cinematic 25mm-250mm 10x CINE-SERVO lens offers further reach up to 375mm in Full Frame mode (from the standard 250mm), with its 1.5x extender. Designed to produce sharp images from centre to outer edges, even when paired with 8K cameras. The lens also produces the beautiful warm colour tones synonymous with Canon’s cinema lens family. The 10x zoom lens can handle a wide range of shooting situations, from 25mm wide angle, to 250mm telephoto, in a single lens. This range can be pushed to 375mm with the built-in 1.5x Optical Extender. While the lens fully supports Super 35mm, the built-in extender that increases the image size will make the lens becomes compatible with 35mm Full Frame sensor cameras too.
Read more
Sony AXS-A1TS66 1TB Memory Card
AXS Memory A Series card, with 6.6 Gbps guaranteed write speed and 1 TB capacity Ideal for VENICE 2 with high-speed 8K and 6K X-OCN recording. Compatible with the AXS-R7 Memory recorder, such as the VENICE, PMW-F55, and PMW-F5. Record 8K X-OCN and 6K X-OCN with VENICE 2. Works with AXS-R7, AXS-R5, AXS-AR3, AXS-CR1 and AXS-AR1. 4K HFR recordings
Read more
Chroziel CDM-LP-I Iris Motor
Adjust the aperture of your cine zoom or prime lens using this Lensport Iris Motor from Chrosziel and its universal connectivity. The motor features an integrated 12-pin Hirose connector cable which inserts into your compatible camera's Hirose output port. Both control and power are delivered via this connection and camera-specific broadcast protocol with a torque of 0.5 N-m. Mount the motor on your camera configuration via a 15mm rod clamp and slide it along the rod to accommodate the length of your lens. Two 0.8 MOD gears in different diameters can be switched out to properly attach to your mounted lens. Once the motor's cable is connected to the corresponding port of your camera, it will automatically calibrate itself and find the end-stops of your lens. If you'd like to use metadata calibration, put the motor into passive mode and turn your lens' aperture ring to confirm the position of T-stop 4 and T-stop 16. The motor can be used in remote control operation via the RCP or WebGUI of your connected camera. It can also be used with auto-iris functionality.
Read more