Back to Grip

Vinten Vision 100 Pan Tilt Head

The Vision 100 fluid head can take advantage of almost all of the tripod’s weight capacity with its maximum 44.1-pound load. The controls for drag are illuminated for use in dark conditions and the counterbalance control uses a digital readout, allowing for repeatable balance settings to best fit your camera. When folded down for transport, the entire system can be compacted to just under 34″ and weighs in at 22.2 pounds. This system includes a ground level spreader and a soft sided carry case to protect your gear during transport and storage.

Features:

  • Digital balance readout for quick repeatable set-ups
  • Instant responsiveness from Perfect Balance
  • Thin Film drag (TF) for outstanding whip pan in any condition
  • High contrast amber LED levelling bubble for quick, precise set-up
  • Extensive operating temperature from -40°C to +60°C

Specification:

  • Bowl size 100 mm
  • Payload 7 kg to 20 kg
  • Platform adjustment +45 to -70
  • Tilt range to ±90°
Category:

Description

The Vision 100 fluid head can take advantage of almost all of the tripod’s weight capacity with its maximum 44.1-pound load. The controls for drag are illuminated for use in dark conditions and the counterbalance control uses a digital readout, allowing for repeatable balance settings to best fit your camera. When folded down for transport, the entire system can be compacted to just under 34″ and weighs in at 22.2 pounds. This system includes a ground level spreader and a soft sided carry case to protect your gear during transport and storage.

Related links:

Vinten Product Manual

Vinten Vision 250 Pan Tilt Head

Ronford-Baker Rolling Spider

Vinten HDT-2 Tripod

Related products

Viewfinder Sidemount
These mounts fix, from underneath, to any of the 3/8 whit tapped holes in the camera base plate, to the front or rear. N119 accommodates the mini wedge used by Sony and Philips. It may be fitted on either side of the camera. The end plate can be used for squaring the arm. The viewfinder may be adjusted sideways after fitting the mount.
Read more
Vinten Quickfix Adaptor
Vinten Heavy-Duty Quickfix Adaptor for Heavy-Duty Tripods and Pedestals. The time taken for set-up and breakdown is wasteful, which is why Vinten have developed the range of Quickfix adaptors. Constructed entirely from corrosion resistant components, Quickfix adaptors are ideal for OB applications. The heavy-duty Quickfix adaptor has an extended capacity range of up to 100 kg / 220.5 lbs and is compatible with the Heavy Duty Tripods as well as all Vinten pedestals.
Read more
Vinten Vector 750
The Vector 750 features a centre of gravity range span of 8 to 25 cm/ 3.1 to 9.8 ", which with its maximum payload of 75 kg / 165.3 lbs, allows a greater use of camera accessories such as talent monitors and spotlights. A monitor bracket is available as an optional accessory. The inclusion of some additional robust internal components makes the Vector 750 even more durable.

Features:

  • Replaceable pan bar fixings for long serviceable life
  • Retractable “T” bar slide plate positioner
  • Pantographic counterbalance for rapid camera/lens balancing

Specification:

  • Wide centre of gravity range
  • 75 kg maximum payload
  • Higher output drag modules provide excellent control for heavier payloads
  • Optional side mounted monitor bracket
  • Extensive operating temperature range from-40° to +60°C
  • Tilt range to +-52°
  • Planform adjustment +145 to -163
Related links:
Vinten Product Manual
Read more
Vinten HDT-2 Tripod
The pinned and glued telescopic leg design provides a wide range of height adjustment whilst offering superior strength and reliability. Set up has been made even simpler with the addition of engraved leg markings for rapid, even deployment and an integral level bubble allows for fine level adjustment. The new clamping system provides progressive feel to a positive stop which indicates when the leg is locked, ensuring simple and confident clamping. Whatever the terrain, the HDT’s three-position swivel foot ensures a stable base. Choose from an increased length spike for soft surfaces, self-levelling pad for harder surfaces or a socket to fit all Vinten skids and floor spreaders. The mid-level spreader is supplied as standard and ensures that the HDT is a convenient and stable option for any application. The single piece, fixed length design of the spreader offers exceptional strength and robustness, and is simple to use and remove when necessary. The HDT systems take care of even the smallest details; captive bolts ensure that filming is never disrupted and an integral carry handle provides confortable and easy repositioning. Combined with the Vision 250 or Vector range, these systems provide maximum control and flexibility wherever the next location may be. Totally new single piece mid level spreader for added strength Integral carry handle for carrying comfort Convenient set up features - Leg markings for easy height positioning and leveling bubble Industry Standard combined 4-bolt and Mitchell interface Three-position swivel foot – Spike (excellent for wet ground), pad and socket for all applications PRODUCT MANUAL
Read more